Fixed Products – Installations

ECPD - Down Discharge Coolers
The down discharge cooler is designed to be supported by a 645mm square plain edged duct with a minimum up-stand of 250mm.

Extract fans are installed to provide a balanced ventilation system. There is a contact in the AFCOOL control system to automatically start an extract fan. Dependent upon local water regulations the drain is normally run onto the roof. Profiles soaker sheets are sometimes used.

All types of membrane roofs can be finished with an appropriately designed up-stand and weather proofing.

ECPT - Top Discharge Coolers
Top discharge coolers offer a simple access solution. Note that the duct work must be completely self supporting – no weight must be carried by the cooler.

The duct can be finished in either 630mm round or square duct which can be attached to the stainless steel top element.

ECPS - Side Discharge Installation
Side discharge coolers are supported from simple brackets and are ideal for modern metal clad structures.

Side discharge coolers are easily fitted with sound attenuators to reduce noise levels in buildings.